Managing Engineering Design Version 1.0

Ackroyd J (1985) Thrust 2 - design of the world land speed record car. James Clayton Lecture, Proc Instn Mech Engrs, 199 (79).

Adamson G (ed) (2003) Industrial Strength Design - How Brooks Stevens shaped your world. The MIT Press, Cambridge, Massachusetts.

Alexander M (1985) Creative marketing and innovative consumer product design - some case studies. Design Studies, 6 (1) (January): 41.

Alpert S (2003) Design Reviews for Effective Product Development (Continuing Education Short Course - see http://www.sae.org), SAE International, Warrendale, Michigan.

Andersen S (1982) Use of Methods for Need Assessment in Product Innovation - A Way of Improving the Utility of New Products. University of Trondheim, Norwegian Institute of Technology, Norway.

Andreasen MM and L Hein (1987) Integrated Product Development. IFS (Publications) Ltd, Bedford and Springer-Verlag, Berlin.

Antonsson EK, Cagan J (2001) Formal Engineering Design Synthesis. Cambridge University Press, Cambridge.

Arup O (1985) The Arup Journal (Ove Arup's 90th Birthday Issue). 20 (1) (Spring). Ove Arup Partnership, London.

Ashby MF (1999) Materials Selection in Mechanical Design (2nd edn). Butterworth-Heinemann, Oxford, UK and Boston, Massachusetts.

Ashley S (1991) Underwriters Laboratories: safer products through tough tests. Mechanical Engineering (January): 63-65.

ASM Handbook, Vol. 11: Failure Analysis and Prevention (2002) (volume eds Becker WT, Shipley RJ). ASM International, Materials Park, Ohio.

ASM Handbooks Online (2003) Full 20-Volume ASM Handbook series available for Web. ASM International, Materials Park, Ohio.

ASME Boiler and Pressure Vessel Code, Section VIII, Division 1. American Society of Mechanical Engineers (ASME International), Fairfield, New Jersey (published every 3 years).

Baker GJ Quality Assurance in Engineering Design. The Institution of Engineering Designers, Westbury, Wiltshire (undated) 4 pp.

Barnett RL (1998) Design Defect: Doctrine of Alternative Design. Safety Brief, 13 (4). Triodyne Inc., Northbrook , IL 60062, USA.

Barnett RL (1998) Patents: Restoring Safety. Safety Brief, 14 (1). Triodyne Inc., Northbrook , IL 60062, USA (ISSN 1041-9489).

Barnett RL (1998) Reasonably Foreseeable Use. Safety Brief, 14 (3). Triodyne Inc., Northbrook , IL 60062, USA (ISSN 1041-9489).

Barnett RL and Switalski WG (1988) Principles of Human Safety. Safety Brief, 5 (1). Triodyne Inc., Northbrook, IL 60062, USA.

Baxter M (1996) Product Design - Practical methods for the systematic development of new products. Chapman & Hall, US.

Bazant ZP, Zhou Y (2002) Why did the World Trade Center Collapse? - Simple Analysis. J Eng Mech, Trans. ASCE.

Belbin RM (1981) Management Teams - Why They Succeed or Fail. Heinemann, London.

Birmingham FA (1991) Quality Improvement Guidelines. Scott Fetzer Companies, Westlake, Ohio.

Blake R, Mouton J (1964) The Managerial Grid. Gulf Publishing Co, Houston, Texas.

Blockley DI, Robertson CI (1983) An analysis of the characteristics of a good civil engineer. Proc Instn Civ Engrs, Pt 2, 75 (March): 77-93.

Bohling S (ed) (2002) the meaning of life. PRODESiGN, Journal of the Designers Institute of New Zealand, Auckland, New Zealand, (August/September 2002): 24-28.

Bolster CF (1984) Negotiating: A Critical Skill for Technical Managers. Research Management (November/December): 18-20.

Breitenberg M (1991) Questions and Answers on Quality, the ISO 9000 Standard Series, Quality System Registration, and Related Issues. NISTIR 4721. US Department of Commerce, National Institute of Standards and Technology, Gaithersburg, Maryland.

Bryant D (1982) Preparing a technical specification. CME. (March): 45-49.

BS 5500 (1982) Specification for Unfired Fusion Welded Pressure Vessels. British Standards Institution, London.

BS 6046 (1984) Use of Network Techniques in Project Management. Part 1: Guide to the Use of Management Planning, Review and Reporting Procedures. British Standards Institution, London.

BS 7000-1 (1999) Design Management Systems. Guide to Managing Innovation. British Standards Institution, London.

BSI PD 6112 (1967) Guide to the Preparation of Specifications (under revision). British Standards Institution, London.

BSI PD 6470 (1983) The Management of Design for Economic Production. British Standards Institution, London.

Cagan J, Vogel CM (2002) Creating Breakthrough Products - Innovation from Product Planning to Program Approval. Prentice Hall PTR, New Jersey.

Carter R, Martin J, Mayblin B, Munday M (1984) Systems, Management and Change. Harper & Row Ltd in association with The Open University, London.

CE Mark: The New European Legislation for Products (1996). ASME Press, ASME International, New York.

Cebon D (2003) Cambridge Engineering Selector, CES4: The CES Family of Software. Granta Design Ltd, Cambridge, UK.

Clarkson PJ, Coleman R, Keates S, Lebbon C (2003) Inclusive Design - Design for the whole population. Springer-Verlag, Berlin, Heidelberg, New York.

Clausing D (1994) Total Quality Development: A Step-by-Step Guide to World-Class Concurrent Engineering. ASME Press, ASME International, New York.

Clements SD (1985) Redesigning the engineer. Proc Instn Civ Engrs, Pt 1, 78 (October): 1191-1202.

Coaker JW (1980) No Man is an Island (Analysis of Three Mile Island Incident): Paper 80-WA/Mgt-5. ASME International, New York.

Commerce Business Daily. (A daily list of US Government procurement invitations, contract awards, subcontracting leads, sales of surplus property and foreign business opportunities). Government Printing Office, Washington, D.C.

Coover HW (1984) Leadership - Key to excellence in innovation. Proc IRI Spring Mtg: 1984 Medalist Address. Industrial Research Institute, Boca Raton, Florida.

Cross N (ed) (1984) Developments in Design Methodology. John Wiley & Sons, Chichester.

Cross N, Roy R (1975) Design Methods Manual. The Open University, Milton Keynes.

Darnell H, Dale MW (1982) Total Project Management - An Integrated Approach to the Management of Capital Investment Projects in Industry. Proc Instn Mech Engrs, 196 (36): 337-346.

de Boer SJ (1989) Decision Methods and Techniques in Methodical Engineering Design. Academisch Boeken Centrum, De Lier, Netherlands.

Defence Standard 05-67/1, (1980) Guide to Quality Assurance in Design. HMSO, London.

Dieter GE (1983) Engineering Design - A Materials and Processing Approach. McGraw-Hill, New York.

Ealey LA (1988) Quality by Design: Taguchi Methods and U.S. Industry. American Supplier Institute, Dearborn, Michigan.

Ehrlenspiel K, Kiewert A, Lindemann U (1998) Kostengünstig Entwickeln und Konstruieren - Kostenmanagement bei der integrierten Produktentwicklung (4. Auflage 2003). Springer-Verlag, Berlin, Heidelberg, New York.

Elinski D (1985) Standards from the Users Perspective. Standards Engineering (March/April): 29-32.

Engineering Council (1986) Managing Design for Competitive Advantage. The Engineering Council and The Design Council, London.

Es-Said OS (2000) Scientific Materials Selection Processes. Proc ASM/ASME Conf Failure Prevention through Education - Getting to the Root Cause (ed Scutti J). ASM International, Materials Park, Ohio, pp 70-80.

Evans B (1985) Japanese-style management, product design and corporate strategy. Design Studies, 6 (January): 25-33.

FEMA 403 (2002) World Trade Center Building Performance Study: Data Collection, Preliminary Observations and Recommendations. Federal Emergency Management Agency, Washington DC.

Finkelstein L, Finkelstein ACW (1983) Review of design methodology. IEE Proc, Part A, 30 (4) (June).

Flurscheim C (1977) Engineering Design Interfaces. Design Council, London.

Frankenberger E, Badke-Schaub P, Birkhofer H (eds) (1998) Designers - The Key to Successful Product Development. Springer-Verlag, London.

French MJ (1971) Engineering Design - The Conceptual Stage. Heinemann, London.

French MJ (1999) Conceptual Design for Engineers (3rd ed). Springer-Verlag, Berlin, Heidelberg, New York.

Gans M (1976) The A to Z of plant startup. Chemical Engineering (March 15): 72-82.

Gardiner P, Rothwell R (1985) Tough customers: good designs. Design Studies, 6 (1) (January): 7-17.

Gatiss J (1981) The personality of the effective design engineer in manufacturing industry. In: Jacques, Powell (eds) Design: Science: Method. Westbury House, Guildford, pp 176-178.

George B (1983) A contrast in style - Europe and the USA. CME (March): 47-48.

George WW (1977) Task teams for rapid growth. Harvard Business Review (March-April): 71-80.

Giddens P (2003) Micro-hydro Turbines (Client - 2001 Design Project), Mech Eng Dept, University of Canterbury, Christchurch, (http://www.mech.canterbury.ac.nz/courses/Projects_01.htm) NZ.

Glegg GL (1969) The Design of Design. University Press, Cambridge.

Grant C (1985) An Economics Primer. Basil Blackwell Ltd, Oxford.

Gregory S (1983) Design for cost manufacture in West Germany. Design Studies, 4 (4): 245-257.

Hajek VG (1977) Management of Engineering Projects. McGraw-Hill Book Co, New York.

Hales C (1985) Designer as chameleon. Design Studies, 6 (2) (April): 111-114.

Hales C (1987) Analysis of an engineering design - The Space Shuttle Challenger. Reprinted as Chapter 9 in: Samuel AE (ed) (1989) Engineering Design and Manufacturing Management. Elsevier, Amsterdam.

Hales C (1987) Analysis of the Engineering Design Process in an Industrial Context - PhD dissertation, University of Cambridge (1st edn). (2nd edn 1991). Gants Hill Publications, Eastleigh, Hants.

Hales C (1990) Proposals, Briefs and Specifications. In: Oakley M (ed) Design Management: A Handbook of Issues and Methods. Basil Blackwell Ltd, Oxford, Chapter 31.

Hales C (1995) Legal Threats to Innovation in Design. Proc ICED-99: WDK 26 (1) Communication and Cooperation of Practice and Science, Technische Universität München, Garching, Germany. pp 41-46.

Hales C (2000) Ten Critical Factors in the Design Process. Proc ASM/ASME Conf Failure Prevention through Education - Getting to the Root Cause (Scutti J ed). ASM International, Materials Park, Ohio, pp 49-55.

Hales C, Howes MAH, Bhattacharyya S (1981) Development of a laboratory test facility for high pressure erosion/corrosion evaluation of coal conversion structural materials. In: Hill VH, Black (eds), The Properties and Performance of Materials in the Coal Gasification Environment. American Society for Metals, Metals Park, Ohio, pp 605-628.

Hales C, Pattin C (2002) Design Review for Failure Analysis and Prevention. In: ASM Handbook, Vol. 11: Failure Analysis and Prevention (2002). ASM International, Materials Park, Ohio, pp 40-49.

Hales C, Poczynok PJ (2001) From Patent to Product - The Long Hard Road. Proc ICED-01: WDK 28, Design Applications in Industry and Education (Paper C586/291).The Institution of Mechanical Engineers, London. pp 99-106.

Hales C, Stevens KJ, Daniel PL, Zamanzadeh M, Owens AD (2002) Boiler Feedwater Pipe Failure by Flow-Assisted Chelant Corrosion. J of Engineering Failure Analysis 9: 235-243.

Hampden-Turner C, Trompenaars A (1993) The Seven Cultures of Capitalism. Doubleday, New York.

Handy CB (1981) Understanding Organizations (2nd ed). Penguin Books Ltd, Harmondsworth, Middlesex.

Heavy Engineering Research Association, Collected Papers on Quality Assurance. HERA Information Centre, Auckland, New Zealand.

Hebert J, Uzgiris SC (1989) The role of safety standards in the design process. ASME 89-DE-3. ASME International, New York.

Heilmann J, Reinventing the wheel. Time Magazine, 02 Dec 2001.

Hein L, Andreasen MM (1983) Integrated product development - a new reference system for methodical design, Proc ICED-83: WDK-10, Computer Aided Design & Design Methods. Heurista, Zurich, pp 289-297.

Heskett J (2002) Toothpicks and Logos - Design in Everyday Life. Oxford University Press, Oxford.

Hollins B, Pugh S (1990) Successful Product Design: What to do and when. Butterworth and Co (Publishers) Ltd, London.

Hollins G, Hollins B (1991) Total Design - Managing the design process in the service sector. Pitman Publishing, London.

Houghton AF (1986) Professional negligence in engineering practice, Proc Instn Mech Engrs, 200 (B-1): 33-36.

Hubbard G (1985) How to pick the personality for the job. New Scientist (31 January): 12-15.

Huber PW (1988) Liability: The Legal Revolution and its Consequences. Basic Books, Inc, New York.

Hubka V (1982) Principles of Engineering Design. Butterworth Scientific, London.

Hudson Institute, Inc. (1999) Mechanical Engineering in the 21st Century - Trends Impacting the Profession. A report to the ASME Committee on Issues Identification. ASME International, New York.

Hughes Aircraft Company (1978) R & D Productivity (2nd edn). Hughes Aircraft Company, Culver City, California.

Hunter TA (1992) Engineering Design for Safety. McGraw-Hill, New York.

Institution of Production Engineers Working Party (1984) A Guide to Design for Production. Institution of Production Engineers, London.

Intermediate Technology Development Group (2003) ITDG Technical Briefs (on-line). Intermediate Technology Development Group, Bourton Hall, Bourton-on-Dunsmore, Rugby, (www.itdg.org) UK.

ISO 9000 (2000) International Standards for Quality Management. International Organization for Standardization, Geneva.

Jones JC (1970) Design Methods - Seeds of Human Futures. John Wiley & Sons, Chichester.

Kagan HA, Van de Water J (1986) Design in jeopardy: The expanding legal responsibilities of engineers, Journal of Professional Issues in Engineering, 112 (1): 58-67.

Kempner T (ed.) (1980) A Handbook of Management (3rd edn). Penguin Books Ltd, Harmondsworth, Middlesex.

Kverneland KO (1996) Metric Standards for Worldwide Manufacturing (2nd ed). ASME Press, ASME International, New York.

Lawrence P, Lee R (1984) Insight into Management. Oxford University Press, Oxford.

Leech DJ (1972) Management of Engineering Design. John Wiley & Sons, London.

Leech DJ, Turner BT (1985) Engineering Design for Profit. Ellis Horwood Engineering Science Series. John Wiley & Sons, Chichester.

Lipin OF (1991) Gosstandart International: The USSR national system for standardization, metrology, and product quality control, ASTM Standardization News, 19 (9) (September): 44-47.

Lupton T (1983) Management and the Social Sciences (3rd ed.). Penguin Books Ltd, Harmondsworth, Middlesex.

Macdonald RM (1985) Drawing up the purchasing specification. Proc Instn Mech Engrs, 199 (B1).

McRobb RM (1983) Customer-perceived quality levels, Quality Assurance, 9 (4) (December): 90-92.

Matousek R (1963) Engineering Design - A Systematic Approach. Blackie & Son Ltd, London.

Mintzberg H (1983) Designing Effective Organizations (Structure in Fives). Prentice-Hall Inc, Englewood Cliffs, New Jersey.

Morrison SJ (1985) Quality management, Proc Instn Mech Engrs, 199 (B3): 153-159.

Muir J (1984) Incompetence at work, CME (October): 48-49.

Muster D, Mistree M (1984) Design in the Systems Age, CME (February): 39-42.

Nadler G (1981) The Planning and Design Approach. John Wiley & Son, New York.

Nadler G (1986) Systems methodology and design. Mechanical Engineering, 108 (9) (September): 84-88.

Newland DE, Cebon D (2002) Could the World Trade Center have been modified to prevent its collapse? J Engineering Mechanics, Trans ASCE, 128 (7): 795-800.

Oakley M (1984) Managing Product Design. Weidenfeld & Nicholson, London.

Oakley M (ed.) (1990) Design Management: A Handbook of Issues and Methods. Basil Blackwell Ltd, Oxford, Chapter 31.

Osgood CC (1970) Fatigue Design, Wiley-Interscience, John Wiley & Sons, Inc, New York.

Ostrofsky B (1987) Design, Planning and Development Methodology. Prentice-Hall, Inc, Englewood Cliffs, New Jersey.

Pahl G, Beitz W (ed Wallace KM) (1984): Engineering Design - A Systematic Approach. The Design Council, London.

Pahl G, Beitz W (1986) Konstruktionslehre (revised edn). Springer-Verlag, Berlin.

Pahl G, Beitz W (ed Wallace KM) (1996): Engineering Design - A Systematic Approach. (2nd ed translated by Wallace K, Blessing L, Bauert F). Springer-Verlag, Berlin, Heidelberg, New York.

Parkinson ST (1982) The role of the user in successful new product development, R & D Management, 12 (3): 123-131.

Peters TJ, Waterman RH (1982) In Search of Excellence. Warner Books Inc, New York.

Petroski H (1994) Design Paradigms - Case Histories of Error and Judgment in Engineering. Cambridge University Press, Cambridge.

Pitts G (1973) Techniques in Engineering Design. Butterworth, London.

Poynter D (1987) Expert Witness Handbook: Tips and Techniques for the Litigation Consultant. Para Publishing, Santa Barbara, California.

Presidential Commission (1986) Report of the Presidential Commission on the Space Shuttle Challenger Accident. Washington, DC, June 6th.

Pugh DS (ed) (1984) Organization theory (2nd edn). Penguin Books, Harmondsworth, Middlesex.

Pugh S (1990) Total Design - Integrated Methods for Successful Product Engineering. Addison-Wesley Publishing Company, Wokingham.

Restatement of the Law Third - Torts: Products Liability, as Adopted and Promulgated by The American Law Institute at Washington, D.C. on May 20, 1997. American Law Institute Publishers, St. Paul, Minnesota, 1998. (ISBN 0-314-23194-3).

Rodwell C (1971) Engineering Design Management, CME (July): 243.

Rothschild EE (1987) Product Development Management. T. Wilson Publishing Company, Australia.

Rothwell R, Schott K, Gardiner P (1983) Design and the Economy. The Design Council, London.

Ryan NE (ed) (1988) Taguchi Methods and QFD, Hows and Whys for Management. American Supplier Institute (ASI), Dearborn, Michigan.

Ryssina VN, Koroleva GN (1984) Role structures and creative potential of working teams, R & D Management, 14 (4) (October): 233-237.

Sackleh FJ (1984) Engineering and Leadership: Paper 84-WA/Mgt-3. American Society of Mechanical Engineers, New York.

Samuel AE (ed) (1989) Engineering Design and Manufacturing Management - Proc Workshop on Engineering Design and Manufacturing Management, University of Melbourne, Australia, 21-23 November 1988. Elsevier, Amsterdam.

Saunders M (1991) ISO 9000 and Marketing in Europe: Should V.S. Manufacturers be Concerned? U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, Maryland.

Schumacher EF (1973) Small is Beautiful. Blond and Briggs Ltd. (ABACUS edition published 1974, Sphere Books Ltd.), UK.

Sedig K (2003) Swedish Innovations. The Swedish Institute, Stockholm, Sweden.

Shigley JE (1986) Mechanical Engineering Design. McGraw-Hill, New York.

Smith CO (1983) Design requirements imposed by product liability. Proc. ICED-83: WDK-10, Computer Aided Design & Design Methods. HEURISTA, Zurich, pp 265-269.

Stetter R, Ullman DG (1996) Team-Roles in Mechanical Design. Paper 96-DETC/DTM1508, 1996 ASME Design Engineering Technical Conferences. ASME International, New York.

Strauss JB, Paine CE (1937) (50th Anniversary Edition 1987) The Golden Gate Bridge: Report of the Chief Engineer. Golden Gate Bridge Highway and Transportation District, San Francisco, California.

Sykes RN (1980) The planning and execution of engineering work in a project environment. ASME Paper: 80-WA/Mgt-2. American Society of Mechanical Engineers, New York.

Taguchi Methods: Case Studies from the U.S.A. and Europe. Joint Publication of American Supplier Institute and Japanese Standards Association, Dearborn, Michigan, 1990.

Taguchi Methods: Selected Papers on Methodology and Applications. American Supplier Institute, Dearborn, Michigan, 1990.

Takeuchi H and Nonaka I (1986) The new product development game. Harvard Business Review, January-February: 137-146.

The Need for ISO Standards. American Machinist, 135 (5) (May 1991): 27.

The Technology Partnership (1988) Product Development (Seminar Notes). The Technology Partnership, Melbourn, Herts.

The Why and How of Codes and Standards from the American Society of Mechanical Engineers. ASME International, New York, 1994.

Topalian A (1980) The Management of Design Projects. Associated Press, London.

Toth RB (1984) Putting the U.S. Standards System into Focus with the World. ASTM Standardization News (December): 16-20.

Tovey M (1984) Designing with both halves of the brain. Design Studies, 5 (4) (October): 219-228.

Turner BT (1975) Creative approaches to engineering design. CME (November): 85-89.

Turner B (1982) Design audit. Design Studies, 3 (3) (July): 115.

Turner BT, Williams MR (1983) Management Handbook for Engineers and Technologists. Business Books Ltd, London.

Ullman DG (1992) The Mechanical Design Process. McGraw-Hill, New York.

Ulrich KT, Eppinger SD (2000) Product Design and Development (3rd edn). McGraw-Hill, New York.

VDI-Berichte 457 (1982) Designers Reduce Manufacturing Costs: Methods and Techniques. Verein Deutscher Ingenieure, Dusseldorf (201pp).

VDI Guideline 2221 (1993) Systematic Approach to the Design of Technical Systems and Products (Translation/development of German edition 11/1986). Verein Deutscher Ingenieure, Dusseldorf

VDI 2234 (1990) Basic Economical Information for Design Engineers. Verein Deutscher Ingenieure, Dusseldorf .

VDI 2235 (1982) Economic Decisions in Design (VDI-Richtlinien). Verein Deutscher Ingenieure, Dusseldorf (40 pp).

Wallace KM (1984) Design for Manufacture. Paper 2, Production Engineering Tripos, University Engineering Department, Cambridge (September).

Wallace KM (1988) Developments in Design Teaching in the Engineering Department at Cambridge University. Int J Appl Eng Ed, 4 (3): 207-210.

Wallace KM (1990) A Systematic Approach to Engineering Design. In: Oakley M (ed) Design Management: A Handbook of Issues and Methods. Basil Blackwell Ltd, Oxford, Chapter 22.

Warby DJ (1984) Preparing the offer. Proc Instn Mech Engrs 198B (10).

Wesner JW, Hiatt JM, Trimble DC (1995) Winning with Quality - Applying Quality Principles in Product Development. Addison-Wesley Publishing Company, Reading, Massachusetts.

Willis T, Kaplan MP, Kane MB (1989) Safety in design - an American experience, Proc International Conference on Engineering Design, ICED-89. Institution of Mechanical Engineers, London, Paper C377/110.

White NA (1983) Engineering management: the managerial tasks of engineers, Proc Instn Mech Engrs, 197B (68):1-13.
Whybrew K, Raine JK, Dallas TP, Erasmuson L (2002) A study of design management in the telecommunications industry. Proc Instn Mech Engrs, 216 Part B: 13-23.

Wiele LE, Messner ME (1984) Essential Elements of a Successful Engineering and Construction Project, Journal of Metals, Feb 1984: 41.

Wilson B (1984) SYSTEMS: Concepts, Methodologies and Applications. John Wiley & Sons, Chichester.

Chapter References

Chapter 1