Power measurement unit  
Model Name   POWER_METER(FEEDTHROUGH)
POWER_METER(TERMINATING)  
Symbol   No Symbol  
Generics  
Name   Type   Default   Unit   Description  
T_INTEG   real   1.0e-03   s   integration period  
R_TERM   real   50.0   Ohm   termination resistance  
 
Ports  
Interface   Name   Type/Nature   Mode   Description  
terminal   P_1   ELECTRICAL     first measurement pin  
terminal   P_2   ELECTRICAL     second measurement pin  
quantity   P_DBM   REAL   out   output power  
 
Description   This model describes a power measurement unit with two different
architectures. The architecture feedthrough has no load resistance
but measures the current flowing though it. The architecture
terminating includes a termination resistor to match the
resistance of the preceding block. The power is measured over
an integration period of T_INTEG which is a model parameter
and can therefore be adjusted.
  
Dependencies  
Logical Library   Design Unit/Design Entity  
IEEE_proposed   ELECTRICAL_SYSTEMS  
IEEE   MATH_REAL  
 
Source   See source code  
Example   See test-bench